クイックアンサー — GLOWとは?
GLOW は、共同配合された3種ペプチドブレンドで、 BPC-157 10 mg、, GHK-Cu 50 mg、および TB-500 10 mg in a single lyophilized vial. The combination covers three complementary regenerative mechanisms in one administration: BPC-157’s local angiogenic and growth-factor signalling, GHK-Cu’s copper-mediated dermal remodelling, and TB-500’s systemic G-actin-binding tissue migration. Each vial contains 70 mg of total peptide for clinical studies use only.
📦 すべてのご注文は、当店の 再発送保証ポリシー — 万が一、20営業日以内に商品が届かない場合は、再発送いたします。
| 仕様 | 詳細 |
|---|---|
| 組成 | バイアルあたり BPC-157 10mg + GHK-Cu 50mg + TB-500 10mg(質量比 1:5:1、共製剤) |
| 総ペプチド質量10 mg(5 mg + 5 mg) | 総ペプチド質量 70mg |
| Component CAS Numbers | 137525-51-0(BPC-157)/ 49557-75-7(GHK-Cu)/ 77591-33-4(TB-500 / チモシン β-4) |
| 作用機序プロファイル | VEGFを介した血管新生(BPC-157)+ 銅を介した真皮リモデリング(GHK-Cu)+ G-アクチン結合による全身性組織遊走(TB-500)— 3つの相補的な再生経路 |
| 形態 | 凍結乾燥共製剤粉末(結合したCuによる淡い青色の色合い2+) |
| 純度 | ≥99%(各成分HPLC検証済み、COAはご要望に応じて提供) |
| 保管方法 | 凍結乾燥品:使用時在庫は2~8℃(冷蔵)に保管。未開封バイアルの長期保管には−20℃。再溶解後:2~8℃で約30日以内に使用。光から保護してください。再溶解液の凍結融解は避けてください。 |
| 溶解性 | 静菌水(推奨)。3種類のペプチドはすべて同じバイアルから同時に再構成されます。再構成された溶液は、結合したCuから2+ GHK-Cu の。 |
GLOWとは何ですか?
GLOW is a pharmaceutical-grade co-formulated three-peptide blend that combines BPC-157 (身体保護化合物157)、, GHK-Cu (グリシル-ヒスチジル-リシン銅(II)錯体)、および TB-500 (Thymosin Beta-4 fragment) in a single lyophilized vial at a 1:5:1 mass ratio — 10 mg BPC-157, 50 mg GHK-Cu, and 10 mg TB-500 per vial, for a total of 70 mg peptide mass. The three peptides represent three of the most cited regenerative-compounds in the published literature, each acting on a different molecular axis: BPC-157 on local angiogenesis and growth-factor signalling, GHK-Cu on copper-mediated dermal remodelling and antioxidant signalling, and TB-500 on systemic G-actin-binding and cell migration. The strategic rationale for the GLOW blend is 相補的で重複しない機序 across three regenerative axes. Each component peptide has a distinct molecular target and tissue-distribution pattern, so co-administration covers a broader range of studies endpoints than any single component alone. The blend is intended for studies that benefits from simultaneous activation of all three pathways — a use case distinct from studies designs that require independent dosing of each component peptide. For studies that needs 独立した投与 各ペプチドの(異なる用量、異なるスケジュール、異なる媒体製剤)、成分は単体バイアルとしても用意されています: BPC-157, GHK-Cu, Rosu HDL TB-500. 。別の3バイアルバンドル — ペプチドヒーリングスタック (BPC-157 + TB-500 + bacteriostatic water shipped together as three separate vials) — provides another alternative for studies requiring per-component dose-flexibility. The GLOW co-formulation is specifically for studies at the fixed 1:5:1 mass ratio with single-vial reconstitution. GLOW is supplied as a high-purity lyophilized blend for reconstitution with bacteriostatic water. The reconstituted solution retains a faint blue tint from the bound Cu2+ GHK-Cu成分の — 銅の配位が凍結乾燥と再構成を通じて損なわれていないことを示す有用な定性的指標です。GLOWは 承認されていません by the FDA, EMA, MHRA, or any other major regulator for human therapeutic use as a combination or as any of its component peptides.
作用機序 — 3つの相補的な再生経路
GLOW配合製剤の薬理学的な特異性は、 3軸の作用機序プロファイル — each component activates a fundamentally different regenerative pathway, and the three are non-overlapping at the molecular level. Published studies on each component has established the mechanism in detail; the combination simply delivers all three in a single administration:
- BPC-157(10 mg)— 局所組織修復のためのVEGF/NO/GH受容体シグナル伝達 — The 15-amino-acid pentadecapeptide derived from gastric juice upregulates VEGFR2 (driving new capillary formation at injury sites), enhances endothelial nitric oxide synthase activity (protecting vascular endothelium), and increases growth-hormone receptor expression on fibroblasts and tenocytes (driving collagen synthesis). Most-cited signal: tendon, ligament, gut barrier, and skeletal muscle recovery. Acts more locally than systemic at the injection site.
- GHK-Cu(50 mg)— 銅を介した皮膚リモデリングおよび抗酸化シグナル伝達 — Cu2+-coordinated tripeptide delivers copper as an enzyme cofactor for lysyl oxidase (collagen/elastin cross-linking) and superoxide dismutase (oxidative-stress buffering) while signalling on dermal fibroblasts and keratinocytes. Most-cited signal: skin remodelling, wound healing, anti-aging in connective-tissue studies, hair follicle support, copper-axis pharmacology. Higher mass loading (50 mg in the blend) reflects the larger doses typical of copper-peptide studies vs the microgram-range doses of the other two components.
- TB-500(10 mg)— G-アクチンの隔離と全身性細胞遊走 — The 43-amino-acid thymic peptide is the canonical systemic regenerative compound, binding monomeric G-actin and modulating actin dynamics to drive cell migration, particularly at injury sites. Most-cited signal: systemic muscle and cardiac recovery, vascular repair, and broad systemic distribution that complements BPC-157’s more localised action. Acts as the “systemic arm” to BPC-157’s “local arm”.
3つの経路は 機序的に相補的, not redundant: BPC-157 acts locally on the injury site, TB-500 distributes systemically and supports cell migration globally, and GHK-Cu provides copper-cofactor delivery and dermal-tissue-specific signalling. Co-administering the three in study models covers angiogenesis (BPC-157), systemic recovery (TB-500), and dermal-tissue remodelling (GHK-Cu) simultaneously — a broader studies endpoint coverage than any single component alone. All three peptides have well-tolerated profiles in published preclinical studies, and combination protocols are described in some published studies models of multi-axis tissue regeneration.
Published Evidence
GLOW co-formulation is used in clinical contexts that investigate:
- Multi-axis tissue regeneration — preclinical models combining systemic and local regenerative endpoints; angiogenesis + cell migration + dermal remodelling in single studies designs
- Wound healing studies — 皮膚創傷モデル(全層、部分層、熱傷)、創傷収縮動態、肉芽組織形成、瘢痕組織の特性評価;より包括的な多軸アプローチの一つです
- 腱、靭帯、軟部組織の回復 — rodent Achilles transection models, medial-collateral-ligament rupture studies; published BPC-157 + TB-500 literature is extensive, with the GHK-Cu addition providing copper-cofactor support for collagen cross-linking
- Skin remodelling and dermal studies — collagen and elastin synthesis, dermal-fibroblast proliferation, photo-aging studies; the GHK-Cu component dominates this studies domain
- Comparative co-formulation studies — 単独群との直接比較;三軸併用における相加効果と相乗効果の分析 BPC-157, TB-500, Rosu HDL GHK-Cu アーム;3軸の組み合わせにわたる相加効果と相乗効果の解析
- Vascular and cardiac recovery — BPC-157の血管新生促進シグナルとTB-500の遊走促進シグナルの組み合わせは、血管修復や心虚血モデルに適しています。
- Anti-aging and longevity studies — published work on copper-peptide effects in dermal and connective-tissue aging, particularly relevant for the GHK-Cu component; combined with BPC-157 + TB-500 for broader tissue-aging studies designs
- Inflammation and oxidative-stress studies — copper’s role as cofactor for superoxide dismutase plus the BPC-157 and TB-500 inflammation-modulating effects provide multi-axis anti-inflammatory studies coverage.
より広い文脈については、当社の各 BPC-157, GHK-Cu, Rosu HDL TB-500 成分レベルの薬理に関する製品ページ、 ペプチドヒーリングスタック 3本別個バイアルセット(BPC-157 + TB-500 + 静菌水)の代替品、および姉妹銅ペプチド AHK-Cu for hair-axis studies. Browse the full ペプチドカタログ 化合物選択のために。
利用可能な構成
MedsBaseではGLOWブレンドを単一の共製剤として在庫しています: 1バイアルあたりBPC-157 10 mg + GHK-Cu 50 mg + TB-500 10 mg (質量比1:5:1、総ペプチド量70 mg)。バイアルは10本入りまたは20本入りパック形式で、完全な再構成ガイダンス付きで入手可能です:
| バイアルの組成 | 代表的な使用例 | パックサイズ |
|---|---|---|
| BPC-157 10 mg + GHK-Cu 50 mg + TB-500 10 mg | Standard tri-axis regenerative-studies blend — angiogenesis + dermal remodelling + systemic cell migration in single administration | 10または20バイアル |
All three components are supplied at ≥99% HPLC purity (each verified individually) and pre-mixed in the same lyophilized vial. Because the three peptides have different dose ranges and different roles in the blend, the 1:5:1 mass ratio is fixed at manufacture. Users requiring different ratios should use the stand-alone BPC-157, GHK-Cu, Rosu HDL TB-500 vials instead. Compared with purchasing the three components separately, the GLOW co-formulation offers a meaningful cost saving and the practical convenience of single-vial reconstitution at the fixed studies ratio.
比較:GLOWブレンド vs ペプチドヒーリングスタック
MedsBase carries two multi-peptide studies products that combine the same broader healing-peptide pharmacology in different packaging formats. The choice between them depends on studies design requirements:
| 評価項目 | GLOW Blend | ペプチドヒーリングスタック |
|---|---|---|
| 包装形態 | 単一バイアル、共製剤 | 3つの個別バイアルを同梱発送 |
| 組成 | BPC-157 10 mg + GHK-Cu 50 mg + TB-500 10 mg | BPC-157 5 mg + TB-500 5 mg + 静菌水 |
| 成分数 | 3種類のペプチド(銅ペプチドを含む) | 2種類のペプチド+溶解液(銅ペプチドなし) |
| 用量の柔軟性 | バイアルごとに固定された1:5:1の質量比 | 成分ごとの用量の独立性 |
| 再構成 | 1回限りの溶解 | バイアルごとの再構成 |
| 使用例 | Convenience + fixed-ratio studies; broader 3-axis coverage including dermal remodelling | Dose-flexible studies; classic 2-axis healing focus (BPC + TB only) |
Studies designs that require flexible per-component dosing or that don’t need the copper-peptide arm should use the ペプチドヒーリングスタック. Studies designs that benefit from the broader three-axis coverage (including dermal-tissue remodelling) and that are comfortable with the fixed 1:5:1 mass ratio should use the GLOW blend. Both options are pre-curated for the most-cited healing-peptide studies pharmacology — the difference is packaging format and component breadth.
保管方法と再溶解
再溶解前: 短期使用の作業用ストックとして、凍結乾燥済みバイアルは元の包装のまま2~8°Cで冷蔵保管してください。未開封の長期保管の場合は、-20°Cで凍結してください。凍結乾燥状態のGLOW共製剤は、冷蔵下で最長24ヶ月、-20°Cで最長36ヶ月間安定です。3つの成分ペプチドはいずれも、凍結乾燥状態で非常に適合性の高い安定性プロファイルを示します。凍結乾燥粉末に対して凍結融解サイクルを繰り返さないでください。 再溶解手順: バイアルの側壁に沿って静菌水を注入してください(凍結乾燥ケーキに直接かけないでください)。バイアルには総ペプチド質量70 mgが含まれているため、2.0 mLの再構成液で総ペプチドの作業濃度は35 mg/mLとなり、これはBPC-157 5 mg/mL、GHK-Cu 25 mg/mL、TB-500 5 mg/mLに相当します。静かに円を描くように動かし、 しません 振らずに2~5分間放置して完全に溶解させます。正しく再構成された溶液は、透明で、 淡い青色 結合したCuに由来する2+ GHK-Cu成分の— この色は、凍結乾燥と再構成を通じて銅の配位が維持されていることを示す有用な定性指標です。濁り、沈殿、または青色が認められない場合は問題があることを示しており、破棄してもう一度お試しください。 完全に再溶解した溶液は、無色透明である必要があります。 2~8°Cで冷蔵保管し、3つの成分すべての最適な安定性を得るため、30日以内にご使用ください。再構成した溶液は凍結しないでください。凍結融解サイクルはペプチドの完全性を低下させ、銅の配位に影響を与える可能性があります。常に直射光から保護してください。濁り、沈殿、または予想される淡い青色を超えた変色が認められるバイアルは破棄してください。
よくある質問
What is GLOW used for in studies?
GLOW is used in studies investigating multi-axis tissue regeneration — specifically protocols that benefit from simultaneous activation of three complementary regenerative pathways (BPC-157 angiogenesis + GHK-Cu dermal remodelling + TB-500 systemic cell migration) in a single administration. Common contexts include wound healing models, tendon and soft-tissue recovery, skin remodelling, vascular repair, anti-aging connective-tissue studies, and comparative co-formulation pharmacology. The pharmaceutical-grade GLOW sold here is しません FDA-approved and is supplied strictly for clinical studies use only.
GLOWのバイアルには何が含まれていますか?
各バイアルには含まれています BPC-157 10mg、GHK-Cu 50mg、TB-500 10mg, co-formulated and lyophilized together as a single powder. Total peptide mass per vial: 70 mg. The 1:5:1 mass ratio reflects the different studies-relevant dose ranges of the three components (BPC-157 and TB-500 are used in microgram-to-low-milligram doses; GHK-Cu is used in low-to-mid-milligram doses). All three peptides reconstitute simultaneously when bacteriostatic water is added.
GLOWはPeptide Healing Stackとどのように異なりますか?
これら2つの製品は、関連する治癒ペプチドを組み合わせていますが、包装形態が異なります。 GLOW は、3つのペプチド(BPC-157 + GHK-Cu + TB-500)が固定比率1:5:1で共に製剤化された1本のバイアルです。その ペプチドヒーリングスタック is three separate vials (BPC-157 + TB-500 + bacteriostatic water) shipped in one parcel. GLOW adds the copper-peptide arm and consolidates reconstitution; the Peptide Healing Stack offers per-component dose independence without the copper-peptide component. Choose based on whether your studies needs the dermal-remodelling axis (GLOW) or per-component dose flexibility (Peptide Healing Stack).
GLOWは、それぞれの構成ペプチドとどのように異なりますか?
各成分は単品製品としてもご利用いただけます: BPC-157, GHK-Cu, Rosu HDL TB-500. 単品バイアルでは、成分ごとの用量調節、ペプチドごとに異なる投与スケジュール、およびペプチドごとに異なる溶媒製剤が可能です。GLOWの共製剤は質量比1:5:1に固定されていますが、利便性(1回の再構成、1回の注射)と、3成分を別々に購入する場合と比較してわずかなコスト削減を提供します。
What is the typical GLOW dose?
Dose depends on the studies endpoint. Conservative protocols use 0.04 mL of a 35 mg/mL reconstituted solution (~200 mcg BPC-157 + 1 mg GHK-Cu + 200 mcg TB-500 per administration) several times weekly. Higher-dose protocols scale up proportionally within the fixed 1:5:1 ratio. Users requiring different ratios should use the stand-alone components rather than the blend.
GLOWはFDA承認されていますか?
No. GLOW is not approved by the FDA, EMA, MHRA, or any other major regulator as a combination product. None of the three individual components (BPC-157, GHK-Cu, TB-500) have FDA approval for human therapeutic use either. GHK-Cu is incorporated into some cosmetic products under cosmetic-regulation frameworks, but none of the three peptides is approved as a drug.
GLOW溶液が青みがかっているのはなぜですか?
かすかな青みは、結合したCuに由来します2+ GHK-Cu成分の — 具体的には、Gly-His-Lysトリペプチドによって形成される平面四角形配位環境における銅のd-d電子遷移に由来します。色は、銅配位が無傷であることの有用な定性的指標です:適切に再構成されたGLOW溶液は、かすかな目に見える青みを示すはずです;無色または薄い溶液は、銅の喪失またはGHK-Cu成分の分解を示唆します。他の2つのペプチド(BPC-157、TB-500)は色に寄与しません。
GLOWはどのように保管すべきですか?
凍結乾燥バイアル:短期使用の作業用ストックは2~8°Cで冷蔵、未開封バイアルの長期保管は-20°Cで冷凍保存。再構成溶液:2~8°Cで冷蔵し、30日以内に使用してください。再構成溶液を凍結しないでください — 凍結融解サイクルはペプチドの完全性を低下させ、銅配位またはペプチド骨格の安定性のいずれかに不均衡な影響を与える可能性があります。常に直射光から保護してください。
GLOWを再構成するにはどうすればよいですか?
上記の再溶解手順に従ってください。注射用静菌水をバイアルの内壁に沿って(凍結乾燥ケーキに直接当てないように)加え、静かに旋回させ、完全に溶解するまで2~5分間置きます。 しません バイアルを振ってください。3つのペプチドはすべて同じバイアルから同時に再構成されます。正しく再構成された溶液は透明で、かすかな青みを帯びています。バイアル+2.0 mLの希釈液の場合、作業濃度はBPC-157 5 mg/mL、GHK-Cu 25 mg/mL、TB-500 5 mg/mLです。
MedsBaseではどのような構成の製品を取り扱っていますか?
MedsBaseでは、GLOWを単一の共製剤として取り扱っています:1バイアルあたりBPC-157 10 mg + GHK-Cu 50 mg + TB-500 10 mg(総ペプチド70 mg、質量比1:5:1、凍結乾燥品)。バイアルは10バイアル入りまたは20バイアル入りのパックサイズでご利用いただけます。各成分は個別にHPLC純度99%以上であることが確認されており、分析証明書はご要望に応じて入手可能です。
代わりにGLOWの成分を別々に購入できますか?
はい — MedsBaseでは、3種類の構成ペプチドすべてを単独製品として取り扱っています: BPC-157 2/5/10 mgのバイアルで、, GHK-Cu, Rosu HDL TB-500 in 2/5/10 mg vials. Separate vials are useful if protocols require dose ratios other than the fixed 1:5:1 GLOW ratio, or if users want different scheduling per peptide. The co-formulated GLOW blend offers convenience and cost savings for studies at the 1:5:1 ratio.
Does GLOW cause side reported effects?
All three component peptides have well-tolerated profiles in published preclinical studies at typical doses. The most consistent finding for the combination is the same as for the individual components: local injection-site reactions, occasional flushing at higher doses, and (rarely) modest skin discolouration at the injection site from copper deposition (from the GHK-Cu component). Systemic adverse effects are uncommon in published preclinical literature for any of the three peptides.
How long does GLOW take to show effects in preclinical studies?
Effect onset varies by studies endpoint. Local wound-healing and tissue-recovery effects are typically measurable within 7–14 days of regular dosing. Skin-remodelling effects (collagen synthesis, dermal-fibroblast activity) accumulate over 4–8 weeks. Systemic regenerative effects mediated by TB-500 develop over similar timescales. The combined three-axis profile produces a broader endpoint coverage than any single component, but the kinetics for each axis follow the timeline of the respective component peptide.
GLOWを海外配送で注文できますか?
Yes. MedsBase ships GLOW worldwide from our dedicated peptide shipping network. Peptide-only orders qualify for our standalone peptide shipping service. All orders ship in temperature-controlled packaging with full tracking and are covered by our 再発送保証ポリシー.
Other Peptides for Tissue Regeneration, Wound Healing, and Recovery Studies
- BPC-157 — 身体保護化合物 — GLOWの局所血管新生成分、単独バイアル
- GHK-Cu — 銅トリペプチド — GLOWの皮膚リモデリング成分、単独バイアル
- TB-500(サイモシンベータ-4) — 全身性治癒フラグメント — GLOWの全身性細胞遊走成分
- ペプチドヒーリングスタック — 銅ペプチドを含まない、代替の3バイアルバンドル(BPC + TB + BAC水)
- AHK-Cu — Sister copper peptide to GHK-Cu — hair follicle compound
参考文献
📖 Explore the regenerative-peptide studies landscape
すべてを閲覧 ペプチドカタログ, 、関連する再生化合物としては BPC-157 (局所血管新生), TB-500 (全身性細胞遊走), GHK-Cu (皮膚リモデリング)、および代替の ペプチドヒーリングスタック バンドル。














レビュー
まだレビューはありません